Gritolo TA-M300 T3 20kg Wholesale Price in Pune – ₹500*

The Changediya Cement's online listing advertises Gritolo TA-M300 (T3) Tile Adhesive at ₹500* per 20 kg bag.

This price is particularly relevant for tiling contractors, developers and project managers who need a high-polymer adhesive for applications that extend beyond ordinary ceramic tile fixing.

Compared with basic T1 and standard T2 products, Gritolo TA-M300 is positioned by the manufacturer for larger vitrified tile formats, exterior surfaces and appropriately prepared existing tile substrates.

The product's S1 deformability classification is useful when selecting a technically suitable tile installation system subject to certain temperature changes and limited movement.

When comparing wholesale adhesive offers, assess the product's technical suitability, expected coverage, required quantity, authenticity, GST and transportation cost rather than comparing only the price printed on the bag.

Gritolo TA-M300 T3 – Technical Specifications

Official manufacturer reference: Gritolo TA-M300 T3 Product Specifications .

Technical note: The manufacturer's TA-M300 page lists 25–28% mixing water and 40–45 sq. ft. coverage at 3–4 mm for a 20 kg bag. Some independent listings show different values. Follow the current manufacturer's product-specific instructions.

What Is Gritolo TA-M300 (T3) Tile Adhesive?

Gritolo TA-M300 [T3] is a high-performance, high-polymer-modified cementitious tile adhesive formulated for installations requiring improved bonding, reduced slip, extended open time and measurable deformability.

It is a single-component dry powder adhesive that is mixed with clean water before application.

Its intended applications include approved large-format vitrified and porcelain tiles, suitable exterior floors and walls, and tile-on-tile renovation.

The manufacturer describes this grade as suitable for demanding tiling conditions where ordinary lower-grade adhesives may not provide the necessary performance.

What Does T3 Mean?

Gritolo identifies TA-M300 as its Type 3 adhesive, a higher-performance grade than TA-C100 T1 and TA-V200 T2.

The manufacturer recommends T3 for large-format tiles, appropriate exterior wall installations, certain wet areas and tile-on-tile renovation projects.

What Does C2TES1 Mean?

• C2: Improved cementitious adhesive.
• T: Reduced-slip performance.
• E: Extended open time.
• S1: Deformable adhesive classification.

These technical characteristics help identify suitable installation systems, but they do not guarantee successful performance on every substrate.

Why Does Flexibility Matter?

Exterior tiles and certain large-format tile systems may experience limited thermal and substrate movement.

An adhesive with the specified S1 deformability classification can be useful in an appropriately designed system that needs to accommodate such movement.

However, the adhesive cannot replace expansion joints, structural repairs or mechanical fixings where these are required.

12 Important Benefits of Gritolo TA-M300 T3 Tile Adhesive

1. High-Polymer-Modified Formulation

Developed to provide the manufacturer's specified improved adhesive performance.

2. C2 Improved Adhesion Classification

The manufacturer lists C2TES1, identifying improved cementitious adhesive characteristics under the EN test system.

3. S1 Deformability

Provides measured flexibility for suitable installations affected by limited movement.

4. Large-Format Tile Applications

The manufacturer specifically recommends T3 for approved large-format tile installations.

5. Exterior Wall Applications

Suitable exterior wall and facade applications are included in the manufacturer's guidance, subject to engineering requirements.

6. Reduced Slip

The manufacturer lists reduced-slip performance to help installers position suitable wall tiles.

7. Extended Open Time

The manufacturer's product page states an open time exceeding 30 minutes under specified conditions.

8. Tile-on-Tile Renovation

May be used over appropriately prepared, sound existing ceramic or mosaic tile surfaces.

9. Suitable for Selected Wet Areas

Can be considered for manufacturer-approved wet-area installations, but permanent immersion requires separate confirmation.

10. Suitable for Approved Porcelain and Vitrified Tiles

The product is formulated for selected dense tile materials, including large vitrified tiles and porcelain.

11. Factory-Formulated Convenience

The adhesive is pre-blended, requiring the prescribed clean water rather than hand-proportioned site mixtures.

12. Competitive ₹500* Wholesale Rate

The Changediya Cement's advertised price offers buyers an accessible comparison point for T3 tile adhesive in Pune.

Where Can Gritolo TA-M300 T3 Be Used?

The following are examples of applications within Gritolo's general T3 guidance, provided the complete system is technically suitable:

• Large-format vitrified tile flooring
• Approved porcelain tile installations
• 800 × 800 mm vitrified tiles
• Suitable 1000 × 1000 mm and larger tiles subject to approval
• Residential premium flooring
• Commercial lobby flooring
• Office and hotel flooring
• Appropriate exterior floor tiling
• Selected exterior wall tiling
• Suitable facade tile installations
• Approved balcony and terrace tiling systems
• Tile-on-tile renovation
• Bathroom and wet-room installations
• Approved shower-area tiling systems
• Swimming pool surrounds
• Concrete substrates
• Suitable cement mortar beds
• Properly prepared masonry surfaces
• Compatible fibre-cement and other specialist boards where specifically approved
• Commercial renovation projects

Applications Requiring Higher Grades or Specialist Systems

• Continuously submerged swimming pool interiors without specific approval
• Water tanks and permanently immersed tile systems
• Very heavy natural stone cladding requiring anchors
• Translucent or moisture-sensitive marble
• Resin-backed natural stone
• Engineered quartz and certain artificial stones
• Direct metal, rubber, plastic and glass substrates
• Weak, dusty, painted or unstable substrates
• High-rise facade systems without engineering approval

Important: Gritolo's product page uses broad marketing language about swimming pools, but its limitations section explicitly cautions against continuous immersion without approval. Its current grade-selection guide recommends T4 for swimming pool interiors. Use T3 for pool surrounds and other approved applications, not as an automatic substitute for a specialist underwater system.

Gritolo TA-M300 T3 for Large-Format Tiles

Modern residential and commercial interiors increasingly use larger tile formats, including vitrified and porcelain tiles.

Large tiles demand careful surface preparation, adequate adhesive contact, a suitable bedding thickness and properly designed movement joints.

Gritolo's grade-selection guide identifies TA-M300 T3 as appropriate for approved large-format tile applications such as 800 × 800 mm and larger formats.

Why Is T3 Recommended for Large Tiles?

Larger tiles may introduce greater challenges related to bending, thermal movement and obtaining complete bedding contact.

TA-M300's improved adhesion and S1 deformability can be relevant where the project specification requires these properties.

Is Back-Buttering Necessary?

Back-buttering is often required for large-format tile systems.

It involves applying a suitable layer of adhesive to the tile back in addition to the substrate bed.

Follow the manufacturer's instructions and check the required adhesive contact coverage.

What About Very Large or Heavy Slabs?

Tiles and slabs that are unusually heavy or very large require a technical assessment of their dimensions, weight, substrate and installation conditions.

A higher-grade adhesive or mechanical fixing may be necessary.

Gritolo TA-M300 T3 for Tile-on-Tile Renovation

Tile-on-tile installation involves fixing new tiles over an existing tiled surface without removing the original tiles.

Gritolo lists approved tile-on-tile renovation among TA-M300's intended applications.

However, the success of this method depends on the condition and preparation of the original tiles.

Important Tile-on-Tile Checks

• Confirm that existing tiles are firmly bonded.
• Inspect for loose or hollow tiles.
• Remove grease, wax, oil and incompatible coatings.
• Confirm that the existing surface is structurally stable.
• Prepare or prime the surface where specified.
• Use an approved adhesive contact method.
• Maintain movement joints.
• Check finished floor levels and doorway clearance.

Do not fix new tiles directly over loose, hollow or unstable existing tiles.

Where the existing substrate is defective, repair or remove the failed areas before proceeding.

Gritolo TA-M300 T3 for Exterior Walls and Facades

Exterior tile installations are exposed to sunlight, rain, thermal movement and other environmental stresses.

The manufacturer recommends T3 for appropriate exterior wall applications where the product's improved bonding and flexible performance can be useful.

Nevertheless, facade safety requires consideration of the entire installation system.

Important Exterior Installation Requirements

• Tile size and weight
• Building height
• Wind loading
• Substrate strength
• Expansion joints
• Thermal movement
• Waterproofing and drainage
• Adhesive contact coverage
• Mechanical fixing where required
• Correct curing and installation sequence

For high-rise buildings, large heavy stone slabs and critical exterior facades, obtain project-specific advice from Gritolo and the relevant structural engineer.

Do not assume that the adhesive alone provides all necessary structural support.

Gritolo TA-M300 T3 Coverage Per 20kg Bag

Gritolo's specific TA-M300 product page provides approximate coverage based on the adhesive bed and notched trowel.

Actual coverage depends on surface flatness, tile size, back profile, trowel dimensions, installation technique and required adhesive contact.

Estimated Material Cost at ₹500* Per Bag

The following illustrative quantities are based on the manufacturer's 40–45 sq. ft. coverage estimate at a 3–4 mm bed.

These are whole-bag estimates before additional site wastage, GST and transportation.

Approximate Adhesive Material Cost Per Square Foot

At ₹500* per bag and 40–45 sq. ft. coverage, the base adhesive cost is approximately ₹11.11–₹12.50 per sq. ft.

Where a 6–8 mm adhesive bed is required, the material cost increases because the same bag covers less area.

Coverage clarification: The Changediya Cement's existing listing states a different coverage estimate. Gritolo's specific TA-M300 product page gives 40–45 sq. ft. at a 3–4 mm bed. Use the manufacturer's product-specific coverage values rather than assuming one bag will cover the same area for every tile format.

How to Apply Gritolo TA-M300 T3 Tile Adhesive

Step 1 – Confirm the Tile and Substrate

Verify the tile type, dimensions, backing, installation location and substrate suitability.

Step 2 – Prepare the Surface

Remove dust, oil, grease, loose particles, weak plaster and incompatible coatings.

Step 3 – Inspect Surface Flatness

Correct significant unevenness using an appropriate levelling or screed material before installation.

Step 4 – Prepare Existing Tiles if Renovating

For tile-on-tile work, ensure the original tiles are sound, firmly bonded, clean and prepared as required.

Step 5 – Measure the Mixing Water

Gritolo's product page specifies approximately 25–28% water by powder weight, equivalent to about 5.0–5.6 litres for 20 kg powder.

Step 6 – Mix Thoroughly

Add powder to clean measured water and mix until a smooth, uniform and workable adhesive consistency is achieved.

Step 7 – Follow Resting and Remixing Instructions

Use the manufacturer's current bag instructions for any required slaking and remixing time.

Step 8 – Apply Adhesive to the Substrate

Use the flat side of a suitable trowel to work adhesive into the prepared surface.

Step 9 – Comb With a Notched Trowel

Select the correct notch dimensions to achieve the required adhesive bed and contact coverage.

Step 10 – Back-Butter Large Tiles Where Required

Use a suitable back-buttering method for large-format tiles according to project and manufacturer requirements.

Step 11 – Position the Tiles

Press tiles firmly into fresh adhesive while adjusting alignment and spacing.

Step 12 – Verify Contact Coverage

Periodically lift tiles to confirm that sufficient adhesive contact is being achieved.

Step 13 – Maintain Grout and Movement Joints

Provide suitable spacers, perimeter joints and structural movement joints.

Step 14 – Protect the Installation

Avoid premature foot traffic, heavy loading, water exposure and vibration during curing.

Step 15 – Follow Grouting and Curing Guidance

The manufacturer lists approximately 24 hours before normal grouting or traffic under specified conditions. Actual curing requirements depend on site conditions.

Installation warning: Do not retemper stiffening adhesive by adding extra water. Do not use TA-M300 on unsuitable substrates or outside the manufacturer's application restrictions.

Gritolo TA-C100 T1 vs TA-V200 T2 vs TA-M300 T3 vs TA-G400 T4

For standard vitrified tiles up to 600 × 600 mm on suitable interior floors, Gritolo's selection guide commonly recommends T2.

For larger tile formats, exterior work and tile-on-tile renovation, T3 is generally the recommended starting grade.

For permanently submerged swimming pool interiors and certain specialist stone or industrial systems, obtain technical approval for the correct T4 or reactive adhesive system.

Explore Gritolo's T1–T4 Selection Guide .

Why Choose The Changediya Cement for Gritolo TA-M300 T3?

When comparing tile adhesive wholesalers in Pune, buyers should consider accurate product grades, competitive quotations, stock confirmation, authentic packaging and transportation.

The Changediya Cement, Wagholi, Pune, is a building materials wholesaler with an existing online listing for Gritolo TA-M300 T3 at ₹500*.

1. Competitive ₹500* Advertised Price

The published ₹500* per bag rate provides a clear basis for comparing T3 adhesive wholesale offers.

2. Convenient Wagholi Location

Situated opposite Ganpati Vajan Kata, near BJS College on Pune Nagar Road, the business provides a local purchasing enquiry point for Wagholi and nearby areas.

3. Project-Based Wholesale Enquiries

Contractors, developers and builders can request quotations for larger quantities.

4. Useful for Large-Format Tiling Projects

Customers can enquire about the exact T3 grade required for suitable large-format tile work.

5. Direct Phone Communication

Buyers can contact the business to discuss current prices, product details and stock.

6. Convenient WhatsApp Quotations

Customers can send their quantity and construction site location by WhatsApp.

7. Pune City Wholesale Enquiries

The Changediya Cement welcomes enquiries from construction projects across Pune City.

8. PCMC Wholesale Enquiries

Customers from Pimpri, Chinchwad, Wakad, Moshi, Bhosari, Nigdi, Akurdi and surrounding PCMC localities can request quotations.

9. Pune Rural Wholesale Enquiries

Buyers from Shirur, Chakan, Talegaon, Ranjangaon, Baramati, Daund, Mulshi and other Pune Rural areas can enquire about supply arrangements.

10. Construction Materials Portfolio

The business also features cement, other tile adhesives, waterproofing chemicals and related building materials.

11. Preliminary Material Budgeting

The advertised bag rate and coverage information can support early project cost estimates.

12. Compare the Final Delivered Cost

Buyers can request a written quotation showing product quantity, GST, transportation and delivery terms.

Searching for a competitive Gritolo TA-M300 T3 wholesale offer in Pune? Explore The Changediya Cement's ₹500* listing and contact the Wagholi supplier for a current quotation.

Gritolo TA-M300 T3 Wholesale Enquiries Across Pune City, PCMC and Pune Rural

The Changediya Cement welcomes enquiries from customers throughout Pune district. The following locality names help buyers find the supplier for their area; delivery terms must be confirmed individually.

Wagholi and Eastern Pune

Wagholi, Kharadi, Chandan Nagar, Viman Nagar, Wadgaon Sheri, Lohegaon, Dhanori, Vishrantwadi, Yerawada, Kalyani Nagar, Koregaon Park, Mundhwa, Keshav Nagar, Hadapsar, Magarpatta, Amanora, Manjari, Ghorpadi, Sopan Baug, Loni Kalbhor, Theur, Kunjirwadi, Uruli Kanchan, Kesnand, Bakori, Lonikand and Perne.

Central Pune

Pune Station, Camp, Swargate, Shivajinagar, Deccan Gymkhana, Model Colony, Erandwane, Kasba Peth, Rasta Peth, Somwar Peth, Raviwar Peth, Budhwar Peth, Shukrawar Peth, Shaniwar Peth, Sadashiv Peth, Narayan Peth, Nana Peth, Bhawani Peth, Guruwar Peth, Mangalwar Peth, Ganesh Peth and Ganj Peth.

Western Pune

Kothrud, Karve Nagar, Warje, Bavdhan, Pashan, Aundh, Baner, Balewadi, Sus, Mahalunge, Bhugaon, Bhukum, Pirangut, Lavale, Paud, Nande, Ghotawade, Chandani Chowk, Hinjewadi and Mulshi.

Southern Pune

Parvati, Sahakar Nagar, Bibwewadi, Dhankawdi, Katraj, Ambegaon Budruk, Ambegaon Khurd, Narhe, Vadgaon Budruk, Dhayari, Sinhagad Road, Khadakwasla, Kirkatwadi, Nanded City, Kondhwa, NIBM Road, Wanowrie, Salunke Vihar, Fatima Nagar, Mohammadwadi, Undri, Pisoli, Yewalewadi, Holkarwadi, Phursungi, Uruli Devachi and Wadki.

Pimpri-Chinchwad (PCMC)

Pimpri, Chinchwad, Akurdi, Nigdi, Pradhikaran, Bhosari, MIDC Bhosari, Kasarwadi, Phugewadi, Dapodi, Sangvi, New Sangvi, Pimple Gurav, Pimple Saudagar, Pimple Nilakh, Rahatani, Wakad, Tathawade, Punawale, Ravet, Kiwale, Mamurdi, Thergaon, Kalewadi, Chikhali, Moshi, Charholi, Dudulgaon, Talawade, Triveni Nagar, Dighi, Dehu Road and Nashik Phata.

Pune Nagar Road and Shirur Belt

Wagholi, Lonikand, Perne, Koregaon Bhima, Sanaswadi, Shikrapur, Ranjangaon, Karegaon, Khandale, Pabal, Talegaon Dhamdhere, Nhavare, Wadu Budruk, Yavat, Patas, Kedgaon, Kurkumbh, Daund, Shirur, Inamgaon and Pimpale Jagtap.

Chakan, Khed and North Pune

Chakan, Kuruli, Kharabwadi, Nighoje, Mahalunge Ingale, Nanekarwadi, Medankarwadi, Chimbali, Moi, Alandi, Markal, Dhanore, Shel Pimpalgaon, Rajgurunagar, Khed, Dehu, Dehu Road, Talegaon Dabhade and Vadgaon Maval.

Hinjewadi and Maval

Hinjewadi Phase 1, Hinjewadi Phase 2, Hinjewadi Phase 3, Maan, Marunji, Nere, Jambhe, Gahunje, Somatane, Talegaon Dabhade, Vadgaon Maval, Kanhe, Kamshet, Lonavala, Malavli, Karla and neighbouring locations.

Pune Rural Talukas

Haveli, Shirur, Khed, Maval, Mulshi, Daund, Purandar, Bhor, Velhe, Baramati, Indapur, Junnar and Ambegaon talukas.

Pune Rural Towns and Villages

Manchar, Ghodegaon, Narayangaon, Junnar, Alephata, Otur, Baramati, Malegaon Budruk, Indapur, Bhigwan, Walchandnagar, Jejuri, Saswad, Nira, Bhor, Nasrapur, Khed Shivapur, Kapurhol, Velhe and surrounding villages.

Searching for Gritolo TA-M300 T3 Tile Adhesive in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Shirur, Ranjangaon, Talegaon, Baramati, Saswad or Pune Rural? Contact The Changediya Cement and request your wholesale quotation.

These areas indicate customer enquiry coverage. Actual stock, minimum order quantities, delivery availability and transport charges must be confirmed before purchase.

Gritolo TA-M300 T3 Bulk Wholesale Price Chart

The following illustrative calculations use the advertised ₹500* per 20 kg bag base rate.

These figures are illustrative calculations rather than guaranteed bulk-discount offers.

Applicable GST and transportation are extra.

For larger building projects, contact The Changediya Cement for a current written quotation.

How to Order Gritolo TA-M300 T3 at ₹500*

1. Explore the product: Review Gritolo's official TA-M300 technical specifications.
2. Confirm the application: Check tile format, substrate, interior/exterior conditions and project requirements.
3. Estimate material: Calculate required bags using the appropriate coverage figure.
4. Contact now: Call The Changediya Cement at 9055079555.
5. Share the quantity: Specify how many 20 kg bags you need.
6. Provide the delivery address: Mention your construction site in Pune City, PCMC or Pune Rural.
7. Request a quotation: Confirm the ₹500* price, taxes and transportation.
8. Check the product variant: Confirm the required Grey or White grade and actual packaging.
9. Verify stock and batch: Confirm current availability and product details.
10. Confirm the order: Review the final quotation and delivery terms.

40 Frequently Asked Questions About Gritolo TA-M300 T3 Tile Adhesive

Explore Related Tile Adhesives and Construction Materials

The Changediya Cement's online listings include Gritolo tile adhesives, MYK LATICRETE products and related construction materials.

• Explore The Changediya Cement Official Website
• Explore Gritolo TA-M300 T3 ₹500* Wholesale Listing
• Explore Gritolo TA-V200 T2 ₹350* Listing
• Explore Gritolo TA-C100 T1 ₹200* Listing
• Explore MYK LATICRETE 325 High Flex Grey
• Explore MYK LATICRETE 335 Super Flex Grey
• Explore Building Materials Online

Customers can also enquire about cement, waterproofing chemicals, tile grouts, AAC blocks, block jointing mortar, concrete cover blocks and related construction materials.

Confirm product grade, pack size, colour, available stock and current price before ordering.

Official Gritolo Product and Technical References

• Gritolo TA-M300 T3 – Official Product Page
• Gritolo T1, T2, T3 and T4 Adhesive Selection Guide
• Gritolo Tile Adhesive Grade Comparison
• Gritolo TA-V200 T2 Product Information
• Gritolo TA-C100 T1 Product Information
• Bureau of Indian Standards

Use Gritolo's latest product-specific instructions for adhesive selection, mixing, large-format tile fixing, exterior walls, wet areas and tile-on-tile installations.

Get Gritolo TA-M300 T3 Tile Adhesive at ₹500* in Pune

If you are comparing Gritolo TA-M300 T3 Tile Adhesive wholesale prices in Pune, The Changediya Cement offers a local Wagholi wholesale quotation option at the advertised ₹500* per 20 kg bag rate.

Whether your project is in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati or another Pune district locality, you can contact the supplier with your project requirements.

Explore Gritolo TA-M300 T3. Contact now for the advertised ₹500* wholesale offer. Request your complete quotation and confirm the correct adhesive system for your project.