MYK LATAPOXY Standard 180gm Wholesale Price Pune – ₹500*

The Changediya Cement advertises MYK LATICRETE LATAPOXY Standard 180gm at ₹500* per complete tube kit.

This is a useful price reference for customers comparing specialty epoxy adhesive suppliers in Pune City, PCMC and Pune Rural.

The correct product should be selected by checking the actual bonding surfaces, installation environment, load, preparation method, cure time and required joint design.

Always confirm the original packaging, product batch, shelf life, current offer and final delivered price.

MYK LATAPOXY Standard 180gm Technical Specifications

Official product information: MYK LATICRETE LATAPOXY Standard .

Manufacturer technical document: LATAPOXY Standard Technical Data Sheet .

What Is MYK LATICRETE LATAPOXY Standard 180gm?

LATAPOXY Standard is a two-part epoxy resin bonding system for compatible materials.

The two parts are supplied separately and mixed immediately before application.

When Part A and Part B are properly combined, the mixture cures through a chemical reaction.

Why Is Epoxy Used for Stone Bonding?

Some stone installations require bonding between stone pieces or between stone and other construction materials.

A manufacturer-approved epoxy adhesive can be selected where strong adhesion and suitable cured performance are required.

Why Choose the 180gm Tube Pack?

The smaller pack can be convenient for limited bonding requirements where purchasing a much larger quantity would be unnecessary.

Is LATAPOXY Standard Ready to Apply?

No. The hardener and resin must be mixed correctly before application.

Can It Be Used as Epoxy Tile Grout?

No. Its main function is bonding materials.

Use a dedicated epoxy grout for grouting tile joints.

12 Important Benefits of MYK LATAPOXY Standard 180gm

1. High-Strength Bonding

The manufacturer positions the product as a high-strength epoxy adhesive.

2. Two-Component Epoxy Chemistry

Resin and hardener form a cured bond when mixed correctly.

3. Convenient 180gm Tube Packaging

Useful to consider for small bonding quantities and appropriate repair work.

4. Marble Bonding Capability

Marble is included in the manufacturer's listed substrate categories.

5. Granite Bonding Capability

The product is intended for approved granite bonding applications.

6. Natural Stone Applications

Selected stone installation and fabrication work is included in the product's application scope.

7. Metal Bonding Applications

Prepared metal surfaces are among the listed substrate categories.

8. Concrete Bonding

Appropriate concrete surfaces can be considered where the bonding method is approved.

9. Wood and Glass Bonding

The manufacturer also lists wood and glass as substrate categories.

10. Solvent-Free Formulation

MYK LATICRETE describes LATAPOXY Standard as solvent-free.

11. Chemical Resistance

The manufacturer identifies chemical resistance among its benefits.

12. Advertised ₹500* Wholesale Offer

The Changediya Cement advertises the 180gm kit at ₹500*.

MYK LATAPOXY Standard 180gm Mixing Ratio

Correct proportioning is important for proper epoxy curing and performance.

The technical sheet also lists 1:1 by volume for Part A and Part B.

These ratios use different measurement methods.

Equal weight is not the same as equal volume.

Partial-Batch Mixing Examples

These quantities mathematically follow the manufacturer's 80:100 weight ratio.

For partial batches, measure both parts accurately and follow current manufacturer instructions.

How to Use MYK LATAPOXY Standard 180gm – Step-by-Step

Step 1 – Identify the Bonding Job

Confirm the substrates and installation method are compatible with LATAPOXY Standard.

Step 2 – Examine Both Surfaces

Check for loose materials, contamination, damaged substrates and coatings.

Step 3 – Remove Dust

Clean the surfaces of dust and debris.

Step 4 – Remove Grease and Oil

Use an appropriate surface preparation method.

Step 5 – Remove Rust

For metal bonding, remove rust and unsuitable finishes.

Step 6 – Roughen Where Appropriate

The manufacturer recommends creating a textured surface for improved adhesion.

Step 7 – Prepare Application Tools

Arrange a mixing surface, putty blade, supports and clamps before mixing.

Step 8 – Wear Protective Equipment

Use chemical-resistant gloves and suitable eye protection.

Step 9 – Check the Components

Confirm Part A hardener and Part B resin are the correct materials.

Step 10 – Measure the Correct Ratio

Use 80:100 by weight, or follow the manufacturer's equal-volume instruction.

Step 11 – Mix Thoroughly

Combine both components until the mixture is homogeneous.

Step 12 – Apply Promptly

The manufacturer reports a pot life of about 20–30 minutes under reference testing conditions.

Step 13 – Coat Both Surfaces

Use a putty blade to spread a suitable thin adhesive layer on both prepared surfaces.

Step 14 – Join the Components

Bring the materials together carefully and achieve proper contact.

Step 15 – Complete Alignment

Adjust the bond before the mixture begins to harden.

Step 16 – Clamp or Support

Secure the bonded parts to prevent movement.

Step 17 – Allow Initial Curing

The technical sheet specifies clamping for at least 4–5 hours under appropriate conditions.

Step 18 – Allow Setting

The manufacturer reports approximately 5–6 hours setting time in its reference technical data.

Step 19 – Avoid Premature Loading

Do not apply excessive loads before the adhesive has adequately cured.

Step 20 – Inspect the Finished Bond

Check workmanship and compliance with the project specification.

MYK LATAPOXY Standard for Marble and Granite

Marble and granite are manufacturer-listed substrates for LATAPOXY Standard.

Marble Repairs

The product can be considered for appropriate small marble bonding and repair jobs.

Granite Bonding

Suitable prepared granite components may be joined with the approved system.

Kitchen Stone Moulding

The manufacturer includes kitchen moulding among its application examples.

Staircase Beading

LATAPOXY Standard is listed for suitable staircase beading work.

Stone Fabrication

Small stone components may be bonded when the materials and joint are compatible.

Italian Marble

Check compatibility with polished, translucent or treated marble before permanent application.

MYK LATAPOXY Standard for Metal, Concrete, Wood and Glass

MYK LATICRETE includes multiple substrate categories:

• Natural stone
• Marble
• Granite
• Ceramic
• Concrete
• Metal
• Wood
• Glass

However, this does not mean every combination is suitable for every load or environment.

The exact substrate finish, surface preparation, bonding area and operating conditions must be considered.

Can It Bond Stone to Metal?

Both are manufacturer-listed materials, but the complete joint design requires approval.

Can It Bond Stone to Concrete?

It may be suitable for selected installations with sound, prepared surfaces.

Can It Bond Glass to Stone?

Compatibility and visual appearance should be tested for sensitive assemblies.

Can LATAPOXY Standard Be Used for Stone Cladding?

Stone cladding is included in the manufacturer's application information.

However, external facades, heavy stone panels, overhead installations and safety-critical assemblies may need a structural engineer's design and mechanical anchorage.

MYK LATAPOXY Standard 180gm Coverage Guide

The manufacturer lists up to 120 square feet per 1.8kg set on its official product page.

For the 180gm pack, a proportional mathematical comparison would equal approximately 12 square feet at identical adhesive consumption and thickness.

However, this is not a manufacturer-guaranteed 180gm coverage figure.

For small repair jobs, spot bonding and irregular surfaces, actual consumption may differ substantially.

Factors That Affect Consumption

• Bonding surface area
• Adhesive layer thickness
• Surface roughness
• Material porosity
• Full-area versus localised bonding
• Amount remaining on tools
• Waste during mixing and application
• Bonding joint configuration

For quantity planning, perform a small trial with the intended application method.

MYK LATAPOXY Standard 180gm vs 450gm vs 1.8kg

These prices are the advertised rates supplied for the respective Changediya Cement listings.

At these stated prices, the 450gm pack is ₹50* less than the 180gm pack while containing more adhesive.

The 1.8kg kit can offer a lower base cost per gram for larger jobs.

Before purchasing, confirm current stock, packaging and any special offer conditions.

MYK LATAPOXY Standard vs Epoxy Grout

LATAPOXY Standard should not be confused with MYK LATICRETE epoxy grout products such as SP-100 DUO.

MYK LATAPOXY Standard vs Fast & Clear

MYK LATICRETE also offers LATAPOXY Fast & Clear, which is separately formulated for faster, clear epoxy bonding.

Select the correct product for the actual bonding job.

MYK LATAPOXY Standard 180gm Bulk Wholesale Price Chart

The following are illustrative base-price calculations using the advertised ₹500* per 180gm kit.

These are arithmetic examples, not confirmed extra bulk discounts.

Request an actual quotation for project quantity requirements.

Why Choose The Changediya Cement for LATAPOXY Standard 180gm?

The Changediya Cement is a construction-material wholesale business located in Wagholi, Pune.

Customers comparing epoxy bonding adhesives should consider genuine product packaging, current price, stock, technical suitability, GST and transportation.

1. ₹500* Advertised Wholesale Offer

A published price makes initial budgeting and rate comparisons easier.

2. Convenient Wagholi Location

Located on Pune Nagar Road, opposite Ganpati Vajan Kata, near BJS College.

3. MYK LATICRETE Product Enquiries

Customers can enquire about specialty epoxy adhesives and related construction products.

4. Multiple Pack Comparisons

Compare 180gm, 450gm and 1.8kg for your bonding requirements.

5. Stone Contractor Enquiries

Marble and granite contractors can request product quotations.

6. Builder Enquiries

Builders can enquire about quantity requirements.

7. Direct Phone Contact

Call to confirm the product and price.

8. WhatsApp Quotation Support

Share your required pack quantity and address.

9. Pune City Enquiries

Customers across Pune can contact the supplier.

10. PCMC Enquiries

Buyers from Pimpri, Chinchwad, Bhosari, Wakad and Moshi can request quotations.

11. Pune Rural Enquiries

Contractors in Chakan, Shirur, Ranjangaon, Baramati and other rural areas can enquire.

12. Related Building Materials

The Changediya Cement also lists cement, tile adhesives, epoxy grouts and waterproofing products.

Explore LATAPOXY Standard 180gm from The Changediya Cement, Wagholi, Pune. Contact now to confirm the ₹500* wholesale offer.

LATAPOXY Standard 180gm Wholesale Enquiries Throughout Pune District

The Changediya Cement welcomes wholesale enquiries from Pune City, Pimpri-Chinchwad (PCMC) and Pune Rural.

Customers can enquire about current stock, order quantity, delivery conditions and applicable transportation for their location.

Wagholi and Eastern Pune

Wagholi, Kharadi, Chandan Nagar, Viman Nagar, Wadgaon Sheri, Lohegaon, Dhanori, Tingre Nagar, Vishrantwadi, Yerawada, Kalyani Nagar, Koregaon Park, Mundhwa, Keshav Nagar, Hadapsar, Magarpatta, Amanora, Manjari, Ghorpadi, Sopan Baug, Loni Kalbhor, Theur, Kunjirwadi, Uruli Kanchan, Kesnand, Bakori, Lonikand, Perne, Tulapur, Awhalwadi, Bhavdi and surrounding areas.

Central Pune

Pune Station, Camp, Swargate, Shivajinagar, Deccan Gymkhana, Model Colony, Erandwane, Kasba Peth, Rasta Peth, Somwar Peth, Raviwar Peth, Budhwar Peth, Shukrawar Peth, Shaniwar Peth, Sadashiv Peth, Narayan Peth, Nana Peth, Bhawani Peth, Guruwar Peth, Mangalwar Peth, Ganesh Peth, Ganj Peth, Market Yard, Mukund Nagar, Salisbury Park and Shankar Sheth Road.

Western Pune

Kothrud, Karve Nagar, Warje, Bavdhan, Pashan, Aundh, Baner, Balewadi, Sus, Mahalunge, Bhugaon, Bhukum, Pirangut, Lavale, Paud, Nande, Ghotawade, Chandani Chowk, Susgaon, Maan and Mulshi.

Southern Pune

Parvati, Sahakar Nagar, Bibwewadi, Dhankawdi, Katraj, Ambegaon Budruk, Ambegaon Khurd, Narhe, Vadgaon Budruk, Dhayari, Sinhagad Road, Khadakwasla, Kirkatwadi, Nanded City, Kondhwa, NIBM Road, Wanowrie, Salunke Vihar, Fatima Nagar, Mohammadwadi, Undri, Pisoli, Yewalewadi, Holkarwadi, Phursungi, Uruli Devachi, Wadki and nearby localities.

Pimpri-Chinchwad (PCMC)

Pimpri, Chinchwad, Akurdi, Nigdi, Pradhikaran, Bhosari, MIDC Bhosari, Kasarwadi, Phugewadi, Dapodi, Sangvi, New Sangvi, Pimple Gurav, Pimple Saudagar, Pimple Nilakh, Rahatani, Wakad, Tathawade, Punawale, Ravet, Kiwale, Mamurdi, Thergaon, Kalewadi, Chikhali, Moshi, Charholi, Dudulgaon, Talawade, Triveni Nagar, Dighi, Dehu Road, Nashik Phata, Bopodi and neighbouring areas.

Pune Nagar Road and Shirur Belt

Wagholi, Lonikand, Perne, Koregaon Bhima, Sanaswadi, Shikrapur, Ranjangaon, Ranjangaon MIDC, Karegaon, Khandale, Pabal, Talegaon Dhamdhere, Nhavare, Wadu Budruk, Yavat, Patas, Kedgaon, Kurkumbh, Daund, Shirur, Inamgaon, Pimpale Jagtap and surrounding villages.

Chakan, Khed and North Pune

Chakan, Kuruli, Kharabwadi, Nighoje, Mahalunge Ingale, Nanekarwadi, Medankarwadi, Chimbali, Moi, Alandi, Markal, Dhanore, Shel Pimpalgaon, Rajgurunagar, Khed, Dehu, Talegaon Dabhade and Vadgaon Maval.

Hinjewadi and Maval

Hinjewadi Phase 1, Hinjewadi Phase 2, Hinjewadi Phase 3, Maan, Marunji, Nere, Jambhe, Gahunje, Somatane, Kanhe, Kamshet, Lonavala, Malavli, Karla and adjoining locations.

Pune Rural Talukas

Haveli, Shirur, Khed, Maval, Mulshi, Daund, Purandar, Bhor, Velhe, Baramati, Indapur, Junnar and Ambegaon.

Other Pune Rural Towns and Villages

Manchar, Ghodegaon, Narayangaon, Junnar, Alephata, Otur, Baramati, Malegaon Budruk, Indapur, Bhigwan, Walchandnagar, Jejuri, Saswad, Nira, Bhor, Nasrapur, Khed Shivapur, Kapurhol, Velhe, Paud, Rajgurunagar, and surrounding villages.

Searching for MYK LATAPOXY Standard 180gm in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Pimpri, Chinchwad, Bhosari, Moshi, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati, Junnar, Daund or Indapur? Contact The Changediya Cement for a current wholesale quotation.

How to Order MYK LATAPOXY Standard 180gm at ₹500*

1. Explore: Review the official MYK LATAPOXY Standard product information.
2. Confirm the application: Make sure you need a bonding adhesive rather than tile-joint grout.
3. Identify substrates: Check which materials must be bonded.
4. Check installation requirements: Confirm whether structural fixings are needed.
5. Estimate quantity: Determine the number of 180gm kits required.
6. Compare packaging: Also consider the advertised 450gm and 1.8kg packs.
7. Contact now: Call The Changediya Cement at 9055079555.
8. Specify the product: Ask for MYK LATICRETE LATAPOXY Standard 180gm.
9. Confirm components: Check Part A 80gm and Part B 100gm.
10. Share quantity: Mention the number of kits.
11. Provide your address: State your Pune City, PCMC or Pune Rural location.
12. Confirm the offer: Ask whether the ₹500* rate is currently valid.
13. Check additional charges: Ask for GST and transportation.
14. Verify packaging: Confirm original sealed tubes and batch details.
15. Complete the order: Agree on payment, collection or delivery terms.

40 Frequently Asked Questions About MYK LATAPOXY Standard 180gm

Explore Related Products at The Changediya Cement

• Explore The Changediya Cement Official Website
• Explore LATAPOXY Standard 180gm ₹500* Listing
• Explore LATAPOXY Standard 450gm ₹450* Listing
• Explore LATAPOXY Standard 1.8kg Product
• Explore MYK SP-100 DUO Epoxy Grout
• Explore MYK LATICRETE 335 Tile Adhesive
• Explore MYK LATICRETE 325 Tile Adhesive
• Explore Other Construction Materials

The Changediya Cement also welcomes enquiries for cement, construction adhesives, tile grouts, waterproofing chemicals, concrete cover blocks and other building materials.

Official MYK LATICRETE Technical References

• Official LATAPOXY Standard Product Page
• LATAPOXY Standard Technical Data Sheet
• LATAPOXY Standard Part A Safety Data Sheet
• Explore LATAPOXY Fast & Clear
• Explore MYK LATICRETE Specialty Adhesives

Always use the latest manufacturer technical information and safety instructions for the actual bonding application.

Buy MYK LATAPOXY Standard 180gm at ₹500* in Pune

If you are comparing MYK LATICRETE LATAPOXY Standard 180gm epoxy adhesive wholesale prices in Pune, The Changediya Cement offers a Wagholi-based quotation option at the advertised ₹500* per tube kit.

Whether your project is in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Pimpri, Chinchwad, Bhosari, Moshi, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati, Junnar, Daund, Indapur or another Pune district area, contact the supplier for current stock and terms.

Explore LATAPOXY Standard 180gm, contact The Changediya Cement now, and request your wholesale quotation.