MYK SP100 DUO Epoxy Grout 5kg Wholesale Price Pune – ₹2600*

The Changediya Cement advertises MYK SP-100 DUO Epoxy Grout 5kg at ₹2600* per complete kit for wholesale enquiries throughout Pune district.

This price gives builders, contractors, interior designers, tile applicators and homeowners a clear starting point when comparing premium epoxy grout quotations.

The 5 kg kit is particularly relevant for larger grouting requirements where using multiple smaller kits may be less convenient.

However, buyers should compare more than just the price. Consider the exact shade, kit components, product authenticity, joint width, expected coverage, project exposure and final delivered cost.

The Changediya Cement, located on Pune Nagar Road, Wagholi, welcomes enquiries from construction projects in Pune City, PCMC and Pune Rural.

MYK LATICRETE SP-100 DUO 5kg – Technical Specifications

Official technical references: MYK SP-100 DUO Official Product Page and SP-100 DUO Technical Data Sheet .

Important product distinction: SP-100 DUO is a two-component epoxy grout. Standard SP-100 is a three-component epoxy grout, and SP-100 UNO is a separate ready-to-use product. Their instructions, joint widths and exposure limitations should not be interchanged.

What Is MYK LATICRETE SP100 DUO Epoxy Grout?

MYK SP-100 DUO is a reactive-resin epoxy grout formulated to fill joints between appropriately installed tile and stone finishes.

It contains two factory-proportioned components that are mixed together immediately before application.

Once correctly applied and cured, the grout forms a durable joint with high resistance to many stains, moisture and specified chemical exposures.

SP-100 DUO is particularly relevant for projects requiring narrow tile joints, good colour consistency and the manufacturer's declared suitability for approved exterior work.

Why Is It Called DUO?

DUO refers to the product's two-component mixing system. The supplied kit contains Part A and Part B.

Unlike standard SP-100, no separate third coloured filler component is mixed into the DUO system.

What Is the Difference Between Epoxy Grout and Cement Grout?

Conventional cementitious grout is based on a cement binder, whereas epoxy grout cures through a resin and hardener reaction.

A correctly installed epoxy grout can provide improved resistance to many everyday stains and cleaning conditions.

However, installation technique, joint preparation, cleaning and curing remain essential.

Is SP100 DUO a Tile Adhesive?

No. SP-100 DUO is a tile-joint grout. It is primarily used to fill gaps between tiles, not as the primary adhesive for bonding tiles to floors or walls.

Tile adhesives, waterproofing membranes and movement-joint sealants are separate products.

12 Important Benefits of MYK SP100 DUO Epoxy Grout

1. Two-Component Formulation

The manufacturer supplies the grout as factory-proportioned Part A and Part B for complete-kit mixing.

2. Suitable for Narrow Joints

The product is designed for tile joints from 1 mm to 8 mm.

3. UV-Resistant Performance

The manufacturer specifically identifies SP-100 DUO as suitable for approved exterior applications.

4. High Stain Resistance

Designed to resist many common food, beverage and household stains.

5. Water-Resistant Grout Joints

Provides low-water-absorption grout joints when installed and cured correctly.

6. Antibacterial and Antifungal Properties

The manufacturer identifies germ-resistant performance as a feature of the grout.

7. Colour-Fast Appearance

Developed for a durable and attractive joint finish, subject to exposure and cleaning conditions.

8. Chemical Resistance

The manufacturer provides a chemical-resistance chart covering specified concentrations and exposure conditions.

9. Durable Grout Joints

The product is described as resistant to cracking and powdering under suitable installation conditions.

10. Suitable Wet-Area Applications

Manufacturer-approved bathrooms, washrooms and swimming pool systems are among the listed application categories.

11. Easier Cleaning

Epoxy grout joints may be maintained using appropriate neutral-pH cleaners and regular cleaning procedures.

12. Competitive Wholesale Price

The Changediya Cement advertises the 5 kg SP-100 DUO kit at ₹2600*, providing a useful quote for Pune buyers.

Where Can MYK SP100 DUO Epoxy Grout Be Used?

The manufacturer's technical data lists several approved interior and exterior tile applications.

• Residential kitchen tile joints
• Kitchen backsplashes
• Bathroom floors and walls
• Washrooms and toilets
• Residential vitrified tile flooring
• Approved ceramic tile joints
• Suitable porcelain tile joints
• Glass mosaic tile joints
• Granite tile joints
• Selected marble tile joints
• Appropriate engineered stone tile joints
• Precast terrazzo tile joints
• Commercial kitchens
• Hotels and restaurants
• Cafeterias
• Schools and institutions
• Hospitals and healthcare facilities
• Selected industrial floors
• Exterior balconies and terraces
• Approved exterior wall tile joints
• Swimming pool tile systems
• Saunas and water features

Applications Requiring Additional Technical Review

• Soft polished marble
• Delicate glazed tiles
• Highly porous natural stones
• Joints wider than 8 mm
• Expansion and perimeter movement joints
• Very aggressive industrial chemicals
• Extremely high-temperature environments
• Pool installations without approved waterproofing
• Exterior areas without suitable movement joints
• Highly UV-exposed light-coloured grout shades

Important: Although SP-100 DUO is described as UV-resistant, its technical data warns that certain lighter shades can darken slightly under direct UV exposure. Confirm the chosen colour's exterior suitability.

MYK SP100 DUO for Exterior Floors and Walls

One of the major features of SP-100 DUO is its manufacturer-declared suitability for approved exterior tile joint applications.

Exterior tiled surfaces experience direct sunlight, rain, temperature variations and movement.

SP-100 DUO is formulated for such approved environments, but correct movement-joint planning remains essential.

Important Requirements for Exterior Tiling

• Choose compatible tiles and grout shades.
• Verify the tile adhesive and substrate are suitable.
• Provide perimeter and expansion joints.
• Use flexible sealant in movement joints.
• Protect grout from strong sunlight during installation.
• Prevent rain and premature water exposure while curing.
• Allow the full manufacturer-recommended cure.
• Seek technical advice for large exterior tile formats.

Can SP100 DUO Eliminate Expansion Joints?

No. The manufacturer's technical data explicitly explains that SP-100 DUO is a solid epoxy grout that cannot accommodate unrestricted tile or substrate movement.

Expansion and movement joints should use a suitable flexible sealant.

Is DUO Better for Exterior Areas Than Standard SP100?

Standard SP-100 is generally recommended for interior and covered exterior installations.

SP-100 DUO specifically includes approved exterior applications in its current product guidance.

The correct selection still depends on exposure, shade, joint width and project specification.

MYK SP100 DUO Epoxy Grout for Kitchens

Kitchen tile joints are regularly exposed to oil, food particles, beverages and cleaning chemicals.

SP-100 DUO's stain-resistant epoxy formulation makes it relevant for approved residential and commercial kitchen tiling.

Residential Kitchen Benefits

It can provide visually consistent grout joints with improved resistance to many everyday stains.

Commercial Kitchen Applications

The manufacturer lists institutional and commercial kitchens among its intended uses.

For facilities exposed to unusually strong acids or elevated temperatures, a specialist industrial grout may be necessary.

Is It Completely Stain-Proof?

The manufacturer markets the grout for stain resistance, but no product should be assumed to resist every substance or cleaning chemical under every exposure condition.

Clean spills promptly and follow the specified maintenance procedure.

MYK SP100 DUO for Bathrooms and Wet Areas

Bathroom tile joints experience water, soap residue, humidity and frequent cleaning.

SP-100 DUO produces water-resistant grout joints and is intended for approved bathroom and washroom installations.

Can SP100 DUO Stop Bathroom Leakage?

No grout alone can guarantee protection against plumbing leaks, failed waterproofing, structural movement or cracks.

A proper waterproofing membrane, compatible tile adhesive and correct drainage are essential for a durable bathroom system.

Can DUO Be Used in Showers?

Yes, in manufacturer-approved shower and wet-area tiling systems with suitable joint dimensions and waterproofing provisions.

MYK SP100 DUO for Swimming Pools and Water Bodies

The manufacturer's technical data includes swimming pools, saunas and water bodies among potential applications.

However, pool tiling requires a complete approved installation system.

Important Swimming Pool Components

• Structurally sound pool shell
• Compatible waterproofing membrane
• Suitable pool tile or mosaic
• Approved tile adhesive
• SP-100 DUO installed correctly
• Appropriate flexible movement-joint sealant
• Proper curing before filling water
• Correct pool chemistry and maintenance

When Can a Swimming Pool Be Filled?

The November 2024 technical sheet instructs that open-air swimming pool grouting should be protected from direct sunlight during application and curing, and discusses keeping the area covered for seven days before filling.

Follow the complete approved manufacturer's curing and commissioning instructions.

MYK SP100 DUO 5kg Colour Options

The manufacturer's current product page lists 14 standard shades and 10 special shades.

Special shades may be subject to minimum order quantities and lead times.

How to Choose the Right Grout Colour

• Choose a matching shade for subtle joints.
• Select contrast for a highlighted tile pattern.
• Check how the grout appears under actual lighting.
• Consider cleaning needs in high-use floors.
• For exterior applications, check UV-related shade guidance.
• Test the grout on delicate and absorbent tile surfaces.
• Confirm the exact shade code before purchasing.

The Changediya Cement can be contacted to enquire about current shade availability.

MYK SP100 DUO vs Standard SP100 vs SP100 UNO

The promotional ₹2600* price in this article applies to MYK LATICRETE SP-100 DUO 5 kg.

It does not apply automatically to SP-100, SP-100 UNO or different grout shades.

How Much Area Does MYK SP100 DUO 5kg Cover?

Epoxy grout coverage depends on tile dimensions, grout joint width, effective joint depth and application wastage.

The manufacturer provides a grout coverage calculator for SP-100 DUO.

Important Factors Affecting Grout Consumption

• Tile length and width
• Tile thickness
• Effective grout joint depth
• Joint width from 1–8 mm
• Tile edge profile
• Surface texture
• Cleaning and application losses

Example: Large Tiles vs Small Tiles

A 600 × 600 mm tile layout usually has less grout joint length per square metre than a 100 × 100 mm tile layout.

Therefore, using the same joint width and depth, smaller tiles generally consume more grout.

Glass mosaic projects can require substantially more grout than large-format vitrified tiles.

Manufacturer Wastage Guidance

The MYK LATICRETE grout calculator recommends reducing the calculated coverage by approximately 10–15% to allow for waste, spillage and cleanup with ceramic and vitrified tiles.

For accurate quantities, use the official calculator rather than relying on a single advertised square-foot coverage figure.

How to Apply MYK SP100 DUO Epoxy Grout 5kg

Step 1 – Confirm the Product

Verify that you have SP-100 DUO, not standard SP-100 or SP-100 UNO.

Step 2 – Check the Shade

Ensure the colour matches the approved tile design and project requirement.

Step 3 – Allow Tile Adhesive to Cure

Before grouting, ensure that the tile adhesive has reached its recommended curing stage.

Step 4 – Prepare the Tile Joints

Remove spacers, loose adhesive, dust and debris. Ensure joints are clean and sufficiently dry.

Step 5 – Check Tile Surface Compatibility

Perform a representative test on porous, polished or delicate tile and stone finishes.

Step 6 – Check Working Temperature

The technical data recommends a substrate temperature of approximately 16°C–32°C.

Step 7 – Prepare the Tools

Arrange a suitable mixer, epoxy grout float, clean sponge, towels, water and protective equipment.

Step 8 – Mix the Complete Two-Component Kit

Pour all Part A into the Part B container and mix thoroughly with a margin trowel or a slow-speed mixer.

Step 9 – Do Not Add Water to the Mix

The factory-proportioned resin and hardener are mixed without adding water.

Step 10 – Transfer the Mixed Grout

The manufacturer recommends transferring the fully mixed contents to the working area promptly.

Step 11 – Fill the Joints Completely

Work grout into the tile joints using an appropriate epoxy grout float.

Step 12 – Remove Excess Material

Scrape the tile surface diagonally with the float to remove excess grout.

Step 13 – Perform Initial Cleaning

The technical sheet recommends initial cleaning approximately 30–45 minutes after application, subject to site conditions.

Step 14 – Complete Final Cleaning

Perform the specified subsequent cleaning within 24 hours to remove remaining haze.

Step 15 – Protect Exterior Work

Provide shade and protect the grout from sunlight and premature water exposure during the recommended cure.

Step 16 – Allow Proper Curing

Respect the manufacturer's 24-hour foot-traffic and seven-day heavy-traffic guidance.

Step 17 – Maintain Expansion Joints

Do not fill structural or perimeter movement joints with rigid epoxy grout. Use compatible flexible sealant.

Safety reminder: Use appropriate gloves, eye protection and ventilation. Consult the manufacturer's Part A and Part B safety data sheets before mixing.

MYK SP100 DUO Curing and Cleaning Times

Actual curing and working time depend on temperature, exposure and installation conditions.

Do not expose uncured grout to strong chemical cleaners, heavy traffic or permanent immersion.

MYK SP100 DUO 5kg Bulk Wholesale Price Chart

The following illustrative amounts use the advertised ₹2600* per 5 kg kit rate.

These amounts are arithmetic examples, not confirmed bulk-discount tiers.

Applicable GST and transportation are additional.

For large requirements, request an up-to-date written quotation for the specific grout shade and quantity.

Why Choose The Changediya Cement for MYK SP100 DUO 5kg?

When comparing epoxy grout suppliers in Pune, buyers should evaluate current price, authentic packaging, shade availability, stock and delivery terms.

The Changediya Cement, Wagholi, Pune, provides a local wholesale enquiry contact for SP-100 DUO and other construction materials.

1. Attractive ₹2600* Price

The advertised offer provides a clear quotation reference for the 5 kg kit.

2. Local Wagholi Business

Located opposite Ganpati Vajan Kata, near BJS College on Pune Nagar Road.

3. Bulk Project Enquiries

Contractors, developers and project managers can enquire about larger grout quantities.

4. Shade Availability Enquiries

Buyers can request current standard and special shade information.

5. Exterior Grout Product Enquiries

Customers can ask for SP-100 DUO when their project requires the manufacturer-approved exterior grout variant.

6. Direct Phone Communication

Discuss pricing, quantity, stock and packing details through a direct call.

7. WhatsApp Quotation Requests

Send the product name, shade, quantity and delivery address.

8. Pune City Enquiries

Buyers across Pune City can contact the Wagholi business.

9. PCMC Enquiries

Customers from Pimpri, Chinchwad, Wakad, Moshi and Bhosari can request wholesale quotations.

10. Pune Rural Enquiries

Construction buyers in Shirur, Chakan, Ranjangaon, Baramati and other rural areas can enquire about supply arrangements.

11. Related Construction Materials

The Changediya Cement also features tile adhesives, waterproofing materials, cement and other building products.

12. Complete Delivered Cost Comparison

Request the base price, GST, transport charges and delivery terms before placing an order.

Looking for MYK SP100 DUO 5kg wholesale pricing in Pune? Explore The Changediya Cement's ₹2600* offer and contact the Wagholi supplier today.

MYK SP100 DUO Wholesale Enquiries Across Pune District

The Changediya Cement welcomes enquiries from Pune City, Pimpri-Chinchwad and Pune Rural. The following areas are relevant local search locations for buyers considering the product.

Wagholi and Eastern Pune

Wagholi, Kharadi, Chandan Nagar, Viman Nagar, Wadgaon Sheri, Lohegaon, Dhanori, Vishrantwadi, Yerawada, Kalyani Nagar, Koregaon Park, Mundhwa, Keshav Nagar, Hadapsar, Magarpatta, Amanora, Manjari, Ghorpadi, Sopan Baug, Loni Kalbhor, Theur, Kunjirwadi, Uruli Kanchan, Kesnand, Bakori, Lonikand, Perne and Tulapur.

Central Pune

Pune Station, Camp, Swargate, Shivajinagar, Deccan Gymkhana, Model Colony, Erandwane, Kasba Peth, Rasta Peth, Somwar Peth, Raviwar Peth, Budhwar Peth, Shukrawar Peth, Shaniwar Peth, Sadashiv Peth, Narayan Peth, Nana Peth, Bhawani Peth, Guruwar Peth, Mangalwar Peth, Ganesh Peth and Ganj Peth.

Western Pune

Kothrud, Karve Nagar, Warje, Bavdhan, Pashan, Aundh, Baner, Balewadi, Sus, Mahalunge, Bhugaon, Bhukum, Pirangut, Lavale, Paud, Nande, Ghotawade, Chandani Chowk and Mulshi.

Southern Pune

Parvati, Sahakar Nagar, Bibwewadi, Dhankawdi, Katraj, Ambegaon Budruk, Ambegaon Khurd, Narhe, Vadgaon Budruk, Dhayari, Sinhagad Road, Khadakwasla, Kirkatwadi, Nanded City, Kondhwa, NIBM Road, Wanowrie, Salunke Vihar, Fatima Nagar, Mohammadwadi, Undri, Pisoli, Yewalewadi, Holkarwadi, Phursungi, Uruli Devachi and Wadki.

Pimpri-Chinchwad – PCMC

Pimpri, Chinchwad, Akurdi, Nigdi, Pradhikaran, Bhosari, MIDC Bhosari, Kasarwadi, Phugewadi, Dapodi, Sangvi, New Sangvi, Pimple Gurav, Pimple Saudagar, Pimple Nilakh, Rahatani, Wakad, Tathawade, Punawale, Ravet, Kiwale, Mamurdi, Thergaon, Kalewadi, Chikhali, Moshi, Charholi, Dudulgaon, Talawade, Triveni Nagar, Dighi, Dehu Road and Nashik Phata.

Pune Nagar Road and Shirur

Wagholi, Lonikand, Perne, Koregaon Bhima, Sanaswadi, Shikrapur, Ranjangaon, Karegaon, Khandale, Pabal, Talegaon Dhamdhere, Nhavare, Wadu Budruk, Yavat, Patas, Kedgaon, Kurkumbh, Daund, Shirur, Inamgaon and Pimpale Jagtap.

Chakan, Khed and North Pune

Chakan, Kuruli, Kharabwadi, Nighoje, Mahalunge Ingale, Nanekarwadi, Medankarwadi, Chimbali, Moi, Alandi, Markal, Dhanore, Shel Pimpalgaon, Rajgurunagar, Khed, Dehu, Talegaon Dabhade and Vadgaon Maval.

Hinjewadi and Maval

Hinjewadi Phase 1, Hinjewadi Phase 2, Hinjewadi Phase 3, Maan, Marunji, Nere, Jambhe, Gahunje, Somatane, Kanhe, Kamshet, Lonavala, Malavli, Karla and surrounding areas.

Pune Rural Talukas

Haveli, Shirur, Khed, Maval, Mulshi, Daund, Purandar, Bhor, Velhe, Baramati, Indapur, Junnar and Ambegaon.

Pune Rural Towns and Villages

Manchar, Ghodegaon, Narayangaon, Junnar, Alephata, Otur, Baramati, Malegaon Budruk, Indapur, Bhigwan, Walchandnagar, Jejuri, Saswad, Nira, Bhor, Nasrapur, Khed Shivapur, Kapurhol, Velhe and nearby villages.

Searching for MYK SP100 DUO epoxy grout in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Talegaon, Shirur, Ranjangaon, Baramati, Saswad, Junnar or Pune Rural? Contact The Changediya Cement for your current quotation.

These locations describe wholesale enquiry coverage. Confirm the actual available shades, stock, minimum quantity, delivery feasibility and transportation charges for your destination.

How to Order MYK SP100 DUO 5kg at ₹2600*

1. Explore the product: Review MYK LATICRETE's official DUO technical sheet.
2. Check the application: Confirm tile compatibility, exposure conditions and joint width.
3. Select the shade: Choose a standard or special colour.
4. Estimate quantity: Use the official grout coverage calculator.
5. Contact now: Call The Changediya Cement at 9055079555.
6. Confirm the product: Specify SP-100 DUO, two-component, 5 kg.
7. State the number of kits: Mention your required order quantity.
8. Share the site location: Provide your Pune City, PCMC or Pune Rural address.
9. Request pricing: Confirm the ₹2600* offer, GST and transport.
10. Check packaging: Verify both components are supplied and sealed.
11. Confirm the shade: Check shade code, stock and lead time.
12. Place the order: Review the final quotation and delivery terms.

40 Frequently Asked Questions About MYK SP100 DUO Epoxy Grout 5kg

Explore Related MYK LATICRETE Grouts and Construction Materials

• Explore The Changediya Cement Website
• Explore SP100 DUO 5kg ₹2600* Product Listing
• Explore MYK LATICRETE SP-100 DUO Product
• Explore Standard SP100 5kg ₹2500* Listing
• Explore Standard SP100 1kg Listing
• Explore MYK LATICRETE 335 Super Flex Grey
• Explore Other Building Materials

Customers can also enquire about tile adhesives, cement, waterproofing chemicals, grout accessories, concrete cover blocks and related construction materials.

Official MYK LATICRETE Technical References

• MYK LATICRETE SP-100 DUO Official Product Page
• SP-100 DUO November 2024 Technical Data Sheet
• Official MYK LATICRETE Grout Coverage Calculator
• Standard SP-100 Three-Component Epoxy Grout
• SP-100 UNO Product Information
• Bureau of Indian Standards

Use the latest manufacturer data sheet for product mixing, installation, colour selection, curing and cleaning.

Get MYK SP100 DUO Epoxy Grout 5kg at ₹2600* in Pune

If you are comparing MYK LATICRETE SP-100 DUO Epoxy Grout 5kg wholesale prices in Pune, The Changediya Cement offers an advertised ₹2600* per kit quotation option from Wagholi.

Whether your project is located in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati or another Pune district locality, contact the supplier with your grout shade and quantity requirements.

Explore MYK SP-100 DUO, contact The Changediya Cement now, confirm shade availability and request your complete wholesale quotation.